Smart attachment type 16A 3-pole for the NRGkick charging unit – for connection to single-phase 16A sockets (max. 16A/3.7kW)
The NRGkick smart attachment gives you the possibility to use the permanently connected NRGkick KfW charging unit also at the sockets specified above.
Patented safety connector system
- Consisting of connector unit and smart attachments
All smart attachments measure the temperature at each individual phase pin – for the smart attachment domestic plug type E+F even at both pins! Other charging units do not measure the temperature at all or only at domestic plug adapters. With NRGkick KfW Select and the smart attachments, on the other hand, you are on the safe side: This way, your NRGkick knows exactly whether too much heat is generated due to a socket that is not optimally installed and avoids dangerous situations even before they arise. If your socket gets too hot, NRGkick regulates the charging current completely independently to ensure safe operation without danger.
- Avoidance of arcing due to automatic hot unplug protection
The connector system reliably prevents arcing. As the only charging unit on the market, the current flow is interrupted here even before the contacts leave each other!
- Highest quality finish
All contact elements of the connector unit and the smart attachments have been provided with a silver coating. This ensures the best contact properties even after years and many thousands of mating cycles!
- Automatic smart attachment detection
The smart attachment used is intelligent and, for example, not only transmits the temperature values or a country-specific charging current limit to the NRGkick – it is of course also identified by the NRGkick charging unit. This ensures that, for example, when using a NRGkick smart attachment 16A can also be charged only with a maximum of 16A.
Pre-order now, delivery from week 19-20 in order of receipt of order.